Downgrade Lightweight AP to Autonomous AP

Downgrade Lightweight AP to Autonomous AP

To downgrade from LWAP to autonomous AP, stepnya following:

1. Download IOS image in cisco.com AP AP series corresponding to

2. Connect the PC to the AP using UTP cable, set your PC's IP to 10.0.0.2, and run tftpd.

3. Hold the small button on the AP, and connect the power on. Still hold the button until the lights stop
    flashing and the AP is red, then release.
    Here the AP will have reset config, mengapply IP 10.0.0.1 and then do a broadcast in one subnet to find      
    the file <image version>-tar.default
    For example: c1130-k9w7-tar.default

4. When able to find the expected image, the AP will download the image. Note that the process of transfer  
    to the tftpd. Wait a few moments. Once the download is successful, the AP will perform a series of  
    process and downgrade into Autonomous AP.